Miele PT 8301 SL Panduan Petunjuk Pengoperasian - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengering Miele PT 8301 SL. Miele PT 8301 SL 44 halaman.
Juga untuk Miele PT 8301 SL: Panduan Petunjuk Pengoperasian (28 halaman), Petunjuk Pengoperasian Singkat (2 halaman)
Halaman Cetak
Levelling the appliance
The dryer does not require a plinth. However, make
sure that any uneven areas of the floor are made
level.
The dryer must be perfectly level to ensure that it
functions correctly.
The screw feet A can be adjusted to align it.
After aligning the dryer correctly you need to use a
screwdriver to secure discs B to the floor plate.
To fit the language insert (programme
selection)
Remove the protective cover on the control panel.
Carefully lift up the lower area of the control panel
cover underneath the programme rotary dial slightly.
Push in the language insert and align it.
Remove the dividers which are located underneath
and press the control panel cover down.
Installation and connection
Reducing the noise level
This dryer is fitted with an exhaust fan which can be
heard during operation.
If this noise disturbs you it is possible to fit a silencer
(available from Miele as an optional accessory) into
the dryer's exhaust duct (see Installation instructions).
Communication module XKM RS232
This dryer can be fitted with a communication module
which enables it to be linked to a PC via a serial
interface.
The slot for the communication module is located on
the rear of the dryer.
17