Miele PT 8301 SL Gebruiksaanwijzing - Pagina 17

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele PT 8301 SL. Miele PT 8301 SL 44 pagina's.
Ook voor Miele PT 8301 SL: Gebruiksaanwijzing (28 pagina's), Korte gebruiksaanwijzing (2 pagina's)

Pagina afdrukken

Levelling the appliance

The dryer does not require a plinth. However, make

sure that any uneven areas of the floor are made

level.

The dryer must be perfectly level to ensure that it

functions correctly.

The screw feet A can be adjusted to align it.

After aligning the dryer correctly you need to use a

screwdriver to secure discs B to the floor plate.

To fit the language insert (programme

selection)

Remove the protective cover on the control panel.

Carefully lift up the lower area of the control panel

cover underneath the programme rotary dial slightly.

Push in the language insert and align it.

Remove the dividers which are located underneath

and press the control panel cover down.

Installation and connection

Reducing the noise level

This dryer is fitted with an exhaust fan which can be

heard during operation.

If this noise disturbs you it is possible to fit a silencer

(available from Miele as an optional accessory) into

the dryer's exhaust duct (see Installation instructions).

Communication module XKM RS232

This dryer can be fitted with a communication module

which enables it to be linked to a PC via a serial

interface.

The slot for the communication module is located on

the rear of the dryer.