HP 2133 Panduan Pengguna Multiboot - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna Multiboot untuk Desktop HP 2133. HP 2133 17 halaman. Hp compaq presario,presario 2100: network guide
Juga untuk HP 2133: Spesifikasi (27 halaman), Panduan Pengguna (25 halaman), Pengaturan Dasar (14 halaman), Panduan Pengguna (20 halaman), Panduan Pemeliharaan (14 halaman), Panduan Pengguna (39 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (34 halaman)

Enabling boot devices in Computer

Setup

The computer will boot to a USB device or a NIC device only if the device has first been enabled in

Computer Setup.

To enable a USB device or a NIC device as a boot device, follow these steps:

Open Computer Setup by turning on or restarting the computer, and then pressing

"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

To enable bootable media in USB drives or in drives inserted into an optional docking device (select

models only), use the arrow keys to select System Configuration > Device Configurations, and

then press enter. Use the arrow keys to select Enable in the USB legacy support field.

NOTE:

at the factory. To disable or reenable this option, select System Configuration > Port Options.

– or –

To enable a NIC device, use the arrow keys to select System Configuration > Boot Options,

and then press enter. Use the arrow keys to select Enable in the Internal network adapter

boot field.

To save your preferences and exit Computer Setup, use the arrow keys to select File > Save

Changes and Exit. Then follow the instructions on the screen.

Your preferences go into effect when the computer restarts.

NOTE:

To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL)

server without using MultiBoot, quickly press

in the lower-right corner of the screen (select models only).

The USB Port option must be enabled in order to use USB legacy support. It is enabled

f12

when the "Network Service Boot" message appears

f10

while the