HP 234664-002 - ProLiant - ML330T02 Panduan Pengenalan - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengenalan untuk Desktop HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 22 halaman. Visualization and acceleration in hp proliant servers
Juga untuk HP 234664-002 - ProLiant - ML330T02: Pertanyaan yang Sering Diajukan (4 halaman), Panduan Pelaksanaan (35 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Ikhtisar (20 halaman), Panduan Pelaksanaan (26 halaman), Panduan Pemecahan Masalah (18 halaman), Panduan Pelaksanaan (11 halaman), Panduan Instalasi (2 halaman), Panduan Konfigurasi (2 halaman), Panduan Pengenalan (19 halaman), Manual Pembaruan (9 halaman), Manual Pembaruan (16 halaman), Panduan Pengenalan (10 halaman), Panduan Petunjuk Instalasi (15 halaman), Ringkasan Teknologi (9 halaman)

HP 234664-002 - ProLiant - ML330T02 Panduan Pengenalan
heat savings realized by disabling processor cores allows the remaining cores to run at a higher
frequency than their rated speed. In specific application environments, this may actually increase
overall system performance.
• Addressing licensing issues. Some software is licensed on a per-core basis. Disabling cores allows
an administrator to match the number of active cores on a server with licensing requirements.
However, some software that is licensed on a per-core basis may not recognize the disabling of
cores unless the core is disabled through the BIOS during POST.

Dynamic Power Management

Dynamic Power Management works hand-in-hand with Turbo Boost to automatically optimize the
performance and power use of the processor, chipset, and memory based on business requirements.
Dynamic Power Management provides the following key improvements:
• The ability to manage power for the processor, chipset, and memory
• More operating power states and lower idle processor power states
• Reduced overhead when transitioning states
These Dynamic Power Management advances allow a processor based on the Intel Microarchitecture
Nehalem to provide greater performance while using the same amount of power as a processor
based on the previous generation Intel Core microarchitecture (Figure 13). Conversely, a Nehalem
processor can achieve performance equivalent to a previous generation processor and use less power
achieving it.
Figure 13. Dynamic Power Management
Lower power consumption with the same performance
Higher performance using the same power
19