Miele KM 360-1 G Panduan Petunjuk Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kompor Miele KM 360-1 G. Miele KM 360-1 G 28 halaman. Gas-hobs
Juga untuk Miele KM 360-1 G: Panduan Petunjuk Pengoperasian (28 halaman), Panduan Petunjuk Instalasi (24 halaman), Panduan Petunjuk Instalasi (28 halaman)

Gas connection

The gas connection must be in

accordance with national and local

regulations.

The relevant building regulations

must also be observed.

Natural gas / liquid gas

The gas connection must be so sited

that it is not adversely heated when the

appliance is in operation.

Pressure Test Point.This is provided on

the gas regulator (supplied for natural

gas).

^ Loosen the screw in the test point

until it is free in its housing. The

screw is retained in this position.

^ Connect the hose from the pressure

gauge.

^ Reassemble one of the large burners,

turn on the gas and manually light the

burners.

Gas pressure must be set by the

approved gas fitter as shown on the

data plate:

Natural gas

ULPG (Propane/Butane)

^ Disconnect gauge and screw in the

test point screw.

When the gas hob has been

installed it is essential to check that

neither the gas pipe nor the

electricity cable is in contact with hot

parts of the appliance or hot gas

exhaust.

If a flexible connection is installed

make sure it does not touch moving

parts of the kitchen furniture, e.g. a

drawer.

A full operational test and a test for

possible leakages must be carried

out by the fitter after installation.

1.0 kPa

2.75 kPa