Allnet ALL2272 Panduan Instalasi Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Kamera IP Allnet ALL2272. Allnet ALL2272 14 halaman. Day/night pan/tilt ip camera
Juga untuk Allnet ALL2272: Panduan Pengguna Firmware (12 halaman)

Halaman Cetak

ALL2272 QIG

Change lighting environment setting

The default setting of lighting environment is 60Hz. However, if the image appears flickery, this might be

because the lighting environment in your country is 50 Hz. Hence, this setting can be changed into 50Hz.

Or if you wish to use this IP Camera in an outdoor environment, this setting can be changed into Outdoor

mode.

Go to "Setting → Basic → Camera → General", choose the environment setting you wish.

Change the Web Interface into your preferred language

Use the settings screen to set the language of the Web Interface.

Go to "Setting → Basic → System → Initialize".

1. Insert Software CD into your CD-ROM.

2. Browse and select the preferred language from language pack in the Software CD and then click OK.

3. The web interface will change into your preferred language.