Allnet ALL2272 빠른 설치 매뉴얼 - 페이지 8

{카테고리_이름} Allnet ALL2272에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allnet ALL2272 14 페이지. Day/night pan/tilt ip camera
Allnet ALL2272에 대해서도 마찬가지입니다: 펌웨어 사용 설명서 (12 페이지)

페이지 인쇄

ALL2272 QIG

Change lighting environment setting

The default setting of lighting environment is 60Hz. However, if the image appears flickery, this might be

because the lighting environment in your country is 50 Hz. Hence, this setting can be changed into 50Hz.

Or if you wish to use this IP Camera in an outdoor environment, this setting can be changed into Outdoor

mode.

Go to "Setting → Basic → Camera → General", choose the environment setting you wish.

Change the Web Interface into your preferred language

Use the settings screen to set the language of the Web Interface.

Go to "Setting → Basic → System → Initialize".

1. Insert Software CD into your CD-ROM.

2. Browse and select the preferred language from language pack in the Software CD and then click OK.

3. The web interface will change into your preferred language.