ALLNIC AUDIO L-8000 DHT Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat ALLNIC AUDIO L-8000 DHT. ALLNIC AUDIO L-8000 DHT 16 halaman. Line-stage preamplifier

Halaman Cetak
ALLNIC AUDIO L-8000 DHT Panduan Pemilik
•
Pure Class A operation
Pure balanced output stage
•
•
As are all Allnic Audio products, the L-8000 DHT is fully RoHS (EU Reduction of Hazardous
Substances regulation) compliant in construction and materials

WHAT'S IN THE BOX?

Please check that the shipping box contains the following:
•
One (1) Allnic L-8000 DHT Preamplifier – in natural aluminum or black, depending on
your order specification
One (1) power cord
•
One (1) remote control
•
Two (2) x AAA batteries for the remote control
•
•
One (1) Owner's Manual
Note:
1)
The L-8000 DHT ships with the tubes installed.
2)
The L-8000 DHT will work with most IEC type aftermarket power cords. The Allnic ZL-
3000 and ZL-5000 power cables will make an excellent match. Of course, only you can
determine the power cord that works most synergistically with the L-8000 DHT in your
system.
3)
Be sure the L-8000 DHT is labeled for the AC voltage of your location. If it is not,
DO NOT connect it to your AC outlet. Please contact your Allnic dealer.
We advise that you keep the box and other packing materials that your L-8000 DHT came in. It
will be useful if you sell your L-8000 DHT or in the unlikely event you need to ship it for service.

SAFETY

CAREFULLY and SLOWLY remove ALL cardboard and Styrofoam cushioning material inside
•
the tube chimneys before operation. DO NOT remove the anti-vibration rings and sleeves
that are on all the tubes except the small voltage regulator (5654).
•
Disconnect the power cord by pulling the plug, not the cable.
Keep the power cord away from any heat source.
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any
•
condensation to evaporate before plugging the unit into an AC connection.
•
Do not attempt any repairs.
•
Do not remove the chassis cover without specific authorization from your Allnic dealer.
•
See the notes on "Location, Location, Location".
8