DIAL PEC-A-1300-1M Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori DIAL PEC-A-1300-1M. DIAL PEC-A-1300-1M 11 halaman. Portable evaporative cooler

TROUBLESHOOTING

Do not repair or disassemble the unit by yourself, unauthorized repair attempts will void the warranty

and may cause injury.

Problem

A. Cooler does not

work at all.

B. No Cool Air

C1. Fan does not

operate.

C2. Fan runs slow

D. Leakage

E. Float Valve

F. Odor

If the above solutions do not resolve the problem, please contact Dial Customer Service and Technical

Support.

Cause/Corrective Action (Control Panel)

1. There is no power going to the electrical cord. Check for proper

connection or tripped circuit breaker.

2. Unit is turned Off. Turn switch to Pump Only, Cooling or Fan setting.

1. Unit is on Fan function and not on Cooling function.

2. Water level is low. Fill reservoir with water (at least half full) and activate

the pump.

3. Pump and/or Pump Hose are/is clogged. Clear debris.

4. Pump may be defective. Replace Pump.

1. Electrical plug on the unit power cord is not plugged into the electrical

outlet properly.

2. Turn dial to Cooling or Fan function.

3. Check for faulty motor capacitor. Motor capacitor may need to be

replaced.

1. Ensure drain plug is securely pressed into hole.

2. Inspect reservoir for cracks or damage.

3. Check for media pad scale build-up. Scaling can cause water to flow to

the outside of the pad and out of the unit.

4. Check for loose water hose connection or leaks from water distribution

system.

1. Adjust the valve if the water level is too low or high.

2. Check for a crack on the float valve causing valve failure and water

leakage. Replace cracked float valve.

1. New unit. When the unit is used for the first time, the Rigid Media Pad will

have an odor, which will dissipate within a week of use.

2. Media Pad may have developed mold or bacterial growth. Replace Media

Pad.