ALLO STM Panduan Instalasi Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Firewall ALLO STM. ALLO STM 9 halaman. Sip threat manager
Juga untuk ALLO STM: Panduan Instalasi Cepat (11 halaman)

Halaman Cetak

STM Appliance 1.0

Initial Setup & Configuration

1. Unpack the items from the box

2. Check that you have all the items listed in the package content.

3. Connect the appliance to the power socket using the USB power cable.

4. Connect the LAN port of the STM to the PBX/VOIP Gateway.

5. Connect the WAN port of the STM to the untrusted/public network.

6. The device will take about a minute to come up & will be fully functional with the default

configuration.

Note:

Some of the PBX/Gateway devices may have an exclusive LAN/Mgmt Interface for device

management purpose other than the Data Interface (also referred as WAN/Public Interface).

In such cases LAN port of the STM should be connected to the Data Interface (aka

WAN/Public Interface).

The device operates as transparent bridging firewall with Deep Packet Inspection enabled

on the SIP traffic. By default, the appliance has been made to acquire the IP Address via

DHCP.

The device has been made to be fully functional with the default configuration. However if

the user needs to tune the device settings & the DPI policies, He/She can tune the

configuration via the Device WebUI.

The device also provides the command line interface accessible via SSH, which will allow

configuring the basic settings and viewing device status.

Management Access

Web GUI

SSH CLI

Management Vlan IP

Quick Installation Guide V2.0

www.allo.com

admin/admin

admin/stmadmin

192.168.100.1/255.255.255.0