Allo RemoteControl NICE TT1N Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Penerima Allo RemoteControl NICE TT1N. Allo RemoteControl NICE TT1N 3 halaman.

INSTRUCTIONS

NICE TT1N

Memorizing the first transmitter:

As soon as the control unit is powered, 2 long beeps will sound

Within 5 seconds press and hold down button ■ of the transmitter to be memorised (for

approx. 3 seconds)

Release button ■ when you hear the first of the 3 beeps confirming memorization

N.B. If transmitters have already been memorised in the control unit, 2 short beeps will be

heard when it is switched on. This means that the above procedure is not valid and another

memorisation procedure must be used

Visit our Website. www.alloremotecontrol.com

Or:

Press and hold down button ■ of the new transmitter until you hear a beep (after about 5

seconds) then release it

Press button ■ of a previously memorized transmitter slowly 3 times

Press button ■ on the new transmitter again, releasing it when you hear the first of the 3

beeps

N.B. 3 long beeps will sound if memorisation has been successfully completed. 6 beeps will

sound when the memory is full (30 transmitters), telling you the transmitter cannot be

memorised.

Visit our website: www.Alloremotecontrol.com