Allo RemoteControl NICE TT1N 지침

{카테고리_이름} Allo RemoteControl NICE TT1N에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl NICE TT1N 3 페이지.

INSTRUCTIONS

NICE TT1N

Memorizing the first transmitter:

As soon as the control unit is powered, 2 long beeps will sound

Within 5 seconds press and hold down button ■ of the transmitter to be memorised (for

approx. 3 seconds)

Release button ■ when you hear the first of the 3 beeps confirming memorization

N.B. If transmitters have already been memorised in the control unit, 2 short beeps will be

heard when it is switched on. This means that the above procedure is not valid and another

memorisation procedure must be used

Visit our Website. www.alloremotecontrol.com

Or:

Press and hold down button ■ of the new transmitter until you hear a beep (after about 5

seconds) then release it

Press button ■ of a previously memorized transmitter slowly 3 times

Press button ■ on the new transmitter again, releasing it when you hear the first of the 3

beeps

N.B. 3 long beeps will sound if memorisation has been successfully completed. 6 beeps will

sound when the memory is full (30 transmitters), telling you the transmitter cannot be

memorised.

Visit our website: www.Alloremotecontrol.com