ABB ACS880-01 Series Panduan Instalasi Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Peralatan Industri ABB ACS880-01 Series. ABB ACS880-01 Series 14 halaman. Industrial drives
Juga untuk ABB ACS880-01 Series: Panduan Instalasi (20 halaman), Manual (16 halaman), Panduan Instalasi dan Start-Up Cepat (17 halaman), Panduan Pengguna (18 halaman)
Halaman Cetak
EN – Quick installation guide
This guide instructs briefly how to install the drive. For more detailed instructions,
engineering guide lines, technical data and complete safety instructions, see the
hardware manual (www.abb.com/drives: Select Document Library and search for
document number 3AUA0000078093 [English]).
Follow the safety instructions
WARNING! Ignoring the following instructions can cause physical injury or
death, or damage to the equipment:
•
Only qualified electricians are allowed to install and maintain the drive.
•
Never work on the drive, motor cable or motor when main power is applied.
After disconnecting the input power, always wait for 5 min to let the intermediate
circuit capacitors discharge before you start working on the drive, motor or
motor cable.
•
Do not work on the control cables when power is applied to the drive or to the
external control circuits.
•
Make sure that dust from borings and grindings does not enter the drive when
installing.
The floor material below the drive must be non-flammable.
Select the power cables
Size the power cables according to local regulations to carry the nominal current
given on the type designation label of your drive.
Ensure the cooling
See table
B
on page
allowed operating temperature range of the drive without derating is -15 to +40 °C.
Protect the drive and input power cable
See fuses manufactured by ABB in table
Install the drive on the wall
See figure
A
on page 3.
3
for the losses and the cooling air flow through the drive. The
EN – Quick installation guide 9
B
on page 3.
3AUA0000085966 Rev A
EN
DA
DE
ES
FI
FR
IT
NL
PT
RU
SV
TR
CN