AllPondSolutions CUV-172 Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Alat sterilisasi AllPondSolutions CUV-172. AllPondSolutions CUV-172 17 halaman. Pond & aquarium uv steriliser

Halaman Cetak

Replacing the UV Bulb

NEVER look directly at the UV light.

When replacing your UV bulb, use this time to clean your quartz sleeve and

carefully examine for any damage or cracks. Take care when handling the

quartz sleeve and UV bulb to avoid any damage to the glass.

1. Unfasten the clip located on the side of the UV

clariﬁer.

IMPORTANT!

Remove the plastic clip located at the

bottom of the UV bulb before trying to remove the

bulb itself.

2. Once cooled, UV bulb can be safely removed by

gently moving it from side to side and pulling free

of unit.

3. You can now replace your UV bulb and

reassemble the unit. Ensure O-rings are replaced

when reassembling to avoid water ingress.

IMPORTANT!

Check regularly that your UV light is

operational by looking at the UV light indicator.

Always change your UV bulb every twelve months regardless of it working or

not, as its performance will lessen by this stage. We recommend to replace

your bulb every 6 months if used for aquarium and 12 months if used for pond.

The

CUV-118

uses a 18w PLL UV bulb.

The

CUV-136

uses a 36w PLL UV bulb.

The

CUV-155

uses a 55w PLL UV bulb.

The

CUV-172

uses 2 x 36w PLL UV bulb.