ABB CPS6000 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Industri ABB CPS6000. ABB CPS6000 6 halaman.
Juga untuk ABB CPS6000: Panduan Memulai Cepat (8 halaman)

ABB CPS6000 Panduan Memulai Cepat
QUICK START GUIDE
This CPS6000 power system is a 23" shelf equipped with a Pulsar Edge Controller.
Single shelf system
Two shelf system
Start with Step A1 of the Two Shelf System Addendum on page 5.
Tools required:
Wire cutters and strippers
Cable crimpers
Torque wrench - 0-65 in-lb (0-10Nm)
Step 1 - Mount Shelf
Attach shelf to the frame using a minimum of four screws (two on each side) - 12-24 (provided).
Step 2 - Connect AC Inputs
Use a pair of needle nose pliers to
remove the divider between the
individual rectifier
Page 1
© 2021 ABB. All rights reserved.
Sockets - 5/16", 7/16, etc.
Screwdrivers- Philips #1 and #2, Flat small
Snap Loose
Plastic
Divider With
Pliers