ABB CPS6000 Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Industrielle Ausrüstung ABB CPS6000 herunter. ABB CPS6000 6 Seiten.
Auch für ABB CPS6000: Schnellstart-Handbuch (8 seiten)
Seite drucken
QUICK START GUIDE
This CPS6000 power system is a 23" shelf equipped with a Pulsar Edge Controller.
Single shelf system
Two shelf system
Start with Step A1 of the Two Shelf System Addendum on page 5.
Tools required:
•
Wire cutters and strippers
•
Cable crimpers
•
Torque wrench - 0-65 in-lb (0-10Nm)
Step 1 - Mount Shelf
Attach shelf to the frame using a minimum of four screws (two on each side) - 12-24 (provided).
Step 2 - Connect AC Inputs
Use a pair of needle nose pliers to
remove the divider between the
individual rectifier
Page 1
© 2021 ABB. All rights reserved.
•
Sockets - 5/16", 7/16, etc.
•
Screwdrivers- Philips #1 and #2, Flat small
Snap Loose
Plastic
Divider With
Pliers