Miller MIGmatic M-25 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Pengelasan Miller MIGmatic M-25. Miller MIGmatic M-25 20 halaman. Air-cooled guns for gmaw and fcaw welding
Juga untuk Miller MIGmatic M-25: Panduan Pemilik (8 halaman), Panduan Pemilik (12 halaman)

Halaman Cetak
Miller MIGmatic M-25 Panduan Pemilik
SECTION 5 − MAINTENANCE & TROUBLESHOOTING
5-1. Removing Nozzle, Contact Tip, And Adapter, Changing Liner, And Cleaning Gun
Casing
1
7/16 in.
Remove nozzle,
contact tip, and
adapter.
Tools Needed:
5/8, 7/16 in.
2
3
4
Head
Tube
5/8 in.
Blow out
gun casing.
3/4 in.
(20 mm)
Liner
Stickout
!
Turn off welding power
source/wire feeder.
1
Nozzle
2
Contact Tip
3
Tip Adapter
4
Nozzle Adapter
.
Wire size stamped on tip −
check and match wire size.
Cut off wire and
disconnect gun
from feeder.
Lay gun cable out
straight before
installing new liner.
Reassemble gun in
reverse order from
taking it apart.
.
Thread wire according to
welding power source/wire
feeder manual.
Unscrew and
remove liner.
Install
Liner
804 466-A
OM-227 796 Page 7