Miller Spoolmatic 30A Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Pengelasan Miller Spoolmatic 30A. Miller Spoolmatic 30A 36 halaman. Welding guns
Juga untuk Miller Spoolmatic 30A: Panduan Pemilik (32 halaman), Panduan Pemilik (32 halaman)

Halaman Cetak

4-1. Gun Specifications

Approximate

Wire Diameter

Wire Feed

Range

.030 Thru 1/16 in.

70 To 900 ipm

(0.8 Thru 1.6 mm)

(1.7 To 23

Aluminum Wire

mpm)

4-2. Duty Cycle And Overheating

100% Duty Cycle At 200 Amperes Using Argon

Continuous Welding

5-1. Connecting To 24 Volt Weld Control

Tools Needed:

1-1/8, 5/8 in.

OM-264 713 Page 8

SECTION 4 − SPECIFICATIONS

Cooling

Maximum

Method

Spool Size

4 in. (102 mm)

Air Cooled

Diameter

Air-Cooled Models

SECTION 5 − INSTALLATION

Weld Circuit Rating

Length: 15-3/8 in.

100 Volts, 200 Amperes,

100% Duty Cycle

Using Argon Shielding Gas

Height: 10-3/4 in.

60% Duty Cycle At 250 Amperes Using Argon

6 Minutes Welding

Overall

Weight

Dimensions

2.9 lb

(1.3 kg)

Gun Only

(390 mm)

Width: 2-1/2 in.

15A Model:

(64 mm)

9 lb (4.1 kg)

Gun With Cable

(273 mm)

30A Model:

14 lb (6.4 kg)

Gun With Cable

Duty Cycle is percentage of 10 min-

utes that unit can weld at rated load

without overheating.

NOTICE − Exceeding duty cycle

can damage unit and void warranty.

4 Minutes Resting

Ref. sduty1 5/95

Gas Hose

Connect fitting to regulator/flowme-

ter (see Section 5-7).

24 Volt Weld Control

Trigger Control Cord

Insert plug into receptacle, and

tighten threaded collar.

Weld Cable

Connect to positive (+) weld output

terminal on welding power source

according to its Owner's Manual.

Ref. T0050 / 150 917-G