Miller Spoolmatic 30A Panduan Pemilik - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Pengelasan Miller Spoolmatic 30A. Miller Spoolmatic 30A 36 halaman. Welding guns
Juga untuk Miller Spoolmatic 30A: Panduan Pemilik (32 halaman), Panduan Pemilik (32 halaman)

Halaman Cetak
Miller Spoolmatic 30A Panduan Pemilik

6-3. Shielding Gas

SECTION 7 − MAINTENANCE & TROUBLESHOOTING
n = Check
* To be done by Factory Authorized Service Agent
Every
3
Months l Damaged Or Unreadable
Labels
l Damaged Gas Hose
Every
6
Months
~ Clean Drive Rolls
After
Each
Spool
Of Wire
~ Gun Liner
OM-264 713 Page 14
2
1
Z = Change
~ = Clean
l Repair Or Replace
Cracked Weld Cable
l Damaged Or Cracked
Plug
~ Blow Out Or Vacuum
Inside
3
!
Disconnect power
before maintaining.
l = Replace
~ Clean And Tighten Weld
Terminals
1
Shielding Gas Cylinder
2
Valve
3
Gun Trigger
Open valve on cylinder just before
welding.
Gun trigger turns weld output and
gas flow on and off (see Section
6-1).
Close valve on cylinder when
finished welding.
sb5.1 6/92 − S-0621-C / Ref. T0050
.
Maintain more often
during severe conditions.
Reference
n Check Gun Cable