Miller ICE-27T Panduan Pemilik - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Senter Miller ICE-27T. Miller ICE-27T 36 halaman. Air-cooled torches for plasma arc cutting
Juga untuk Miller ICE-27T: Panduan Pemilik (36 halaman), Panduan Pemilik (38 halaman)
Halaman Cetak
4-3. Duty Cycle And Overheating
3-1/2 Minutes Cutting
Overheating
4-4. Power Source Dimensions And Weight
Dimensions And Weight
18 lb (8.2 kg)
including torch
4-5. Torch Dimensions And Weight
OM-225 216 Page 10
For Units Connected to a 120 Volt Circuit
or a 240 Volt Circuit:
35% Duty Cycle At 27 amperes, 92 volts dc
35% duty cycle
0
15
Minutes
13-1/8 in
(333 mm)
1 in
(25 mm)
1-3/8 in
3.0 lb (1.4 kg)
(35 mm)
6-1/2 Minutes Resting
5-1/2 in
(140 mm)
9 in
(229 mm)
8-3/8 in
(213 mm)
Duty Cycle is percentage of 10 min-
utes that unit can cut at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, Temperature
trouble light goes On, and cooling
fan runs. Wait fifteen minutes for
unit to cool or temperature light to
go off. Reduce amperage or duty
cycle before cutting or gouging.
Y Exceeding duty cycle can
damage
unit
and
warranty.
A
OR
Reduce Duty Cycle
sduty1 5/95 / Ref. 80503-A
Y Do not move or operate unit
where it could tip.
loc_2 3/96 - Ref. 804 503-A
void
Ref. 802 877