Miller ICE-27T 소유자 매뉴얼 - 페이지 14
{카테고리_이름} Miller ICE-27T에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller ICE-27T 36 페이지. Air-cooled torches for plasma arc cutting
Miller ICE-27T에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지), 소유자 매뉴얼 (38 페이지)
페이지 인쇄
4-3. Duty Cycle And Overheating
3-1/2 Minutes Cutting
Overheating
4-4. Power Source Dimensions And Weight
Dimensions And Weight
18 lb (8.2 kg)
including torch
4-5. Torch Dimensions And Weight
OM-225 216 Page 10
For Units Connected to a 120 Volt Circuit
or a 240 Volt Circuit:
35% Duty Cycle At 27 amperes, 92 volts dc
35% duty cycle
0
15
Minutes
13-1/8 in
(333 mm)
1 in
(25 mm)
1-3/8 in
3.0 lb (1.4 kg)
(35 mm)
6-1/2 Minutes Resting
5-1/2 in
(140 mm)
9 in
(229 mm)
8-3/8 in
(213 mm)
Duty Cycle is percentage of 10 min-
utes that unit can cut at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, Temperature
trouble light goes On, and cooling
fan runs. Wait fifteen minutes for
unit to cool or temperature light to
go off. Reduce amperage or duty
cycle before cutting or gouging.
Y Exceeding duty cycle can
damage
unit
and
warranty.
A
OR
Reduce Duty Cycle
sduty1 5/95 / Ref. 80503-A
Y Do not move or operate unit
where it could tip.
loc_2 3/96 - Ref. 804 503-A
void
Ref. 802 877