ABB G391 Series Panduan Memulai Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Industri ABB G391 Series. ABB G391 Series 13 halaman. Edge ac short circuit current limiter

ABB G391 Series Panduan Memulai Cepat
QUICK START GUIDE
Information – Tools Required
Regulations, standards, site engineering instructions etc. take precedence over these general installation instruc-
tions.
Steel toe safety shoes
Torque wrench - 0-65 in-lb (0-10 Nm) and 40 ft-lbs
Volt Meter for Lock-Out Tag-Out procedures

Check for deliveries:

Make sure that the box contains the
8x #6-32 Screws (CC408578537)
6x 60A Fuses (4600482350P)
6x Fuse Covers (4600480552P)
9x #4-40 Nuts (CC408578388)

Cabinet Top

The top of the Edge cabinet is shown here. The relevant areas are noted:
1.
AC input panel which contains two twist-n-lock AC input receptacles for AC input power.
2. Center back panel to be removed and replaced with Edge AC current limiter G391 assembly.
AC input panel
with two
twist-n-lock
receptacles
Page 8
© 2023 ABB. All rights reserved.
Sockets - as needed for mounting hardware
Screwdrivers - #2 pozi drive screwdriver. Flat and Torx bit
set with security pin
Two AC input
cords with
twist-n-lock
Center-Back Panel
plugs

Figure 4 Cabinet top

Edge_Ilim_G391_QSG
Version. 2.0