3B SCIENTIFIC SKINlike P50 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Medis 3B SCIENTIFIC SKINlike P50. 3B SCIENTIFIC SKINlike P50 20 halaman. Injection arm

English

How to change the tubing system:

• Unfasten the Velcro strips, remove the tubing system, fit the new system into the provided grooves and

refasten it using the Velcro strips.

How to attach the skin:

• The new skin can be easily pulled over the arm core by putting some talcum powder into the skin and

distributing the powder by moving the skin back and forth. Pull the skin over the arm core, put the tube

back through the location hole and the cover plates. The rim of the skin should be squeezed between

the two cover plates. Fasten the ring screw and replace the sealing caps onto the tubes.

Please note the following:

• The skin and the tubing system of the injection arm are subject to wear and tear caused by usage.

We supply the skin or the tubing system as a replacement part.

• As the injection arm is an anatomical model, several – non-puncturable – veins are portrayed in the

skin in addition to the puncturable veins.

• The artificial blood may cause permanent stains. Please handle with care.

• Indwelling vein cannulas may damage the material of the skin and of the tubing system. Please use

only injection cannulas of the recommended size (20 or 21 gauge).

Product numbers for replacement parts

XP102 Infusion bottle with suspension net

XP104 3 complete tubing systems

XP106 Replacement skin with hand core

XP107 Arm core (without hand)

XP108 Artificial blood

In case of complaints, please indicate the serial number imprinted on the core of the injection arm under

the white cover plates.

Name

Injection arm