AquaPRO 03AP546 Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Sistem Penyaringan Air AquaPRO 03AP546. AquaPRO 03AP546 8 halaman. Pressure filter uv clarifier
Juga untuk AquaPRO 03AP546: Petunjuk Manual (16 halaman)

Halaman Cetak

1. Technical Specifications

TROUBLESHOOTING

PROBLEM

WATER NOT

CLEARING UP

UV LAMP INDICATOR

IS NOT LIT

NO WATER DISCHARGE

OUT OF THE FILTER

OUTLET

O WATER DISCHARGE

OUT OF THE WASTE

WATER OUTLET

[email protected]

AQUAPRO AP5000UV Instructions.indd 5

AP5000UV PRESSURE FILTER

REASON

UNITS HAS NOT BEEN ALLOWED TO RUN LONG

ENOUGH

INAPPROPRIATE PUMP SIZE

THE POND AS A WHOLE IS EXTREMELY DIRTY

FISH STOCKS ARE TOO HIGH FOR SYSTEM

FILTER SPONGES ARE DIRTY

UV QUARTZ SLEEVE IS DIRTY

THE FAINT BLUE GLOW FROM THE UV GLOBE MAY NOT

BE VISIBLE DURING BRIGHT SUNLIGHT HOURS

CHECK THAT THE UV UNIT HAS POWER AND THE

POWER POINT IS TURNED ON

THE UV GLOBE MAY BE DEFECTIVE

BACK FLUSH KNOB IS POINTING TOWARDS THE BACK

FLUSH OUTLET

THE PUMP MAY NOT BE CONNECTED TO POWER

POND PLUMBING IS BLOCKED

THE INLET AND OUTLET HOSES MAY BE ON THE WRONG

WAY ROUND

THE BACK FLUSH KNOB HAS JUMPED

THE COGS IN THE LID UNIT

WWW.AQUAPROONLINE.COM.AU

WEB

I N S T R U C T I O N S

SOLUTION

FULL EFFECT OF THE BIOLOGICAL CYCLE HAS

NOT BEEN ALLOWED TO MATURE.

THIS CAN TAKE UP TO 8 WEEKS.

WATER FLOW IS TOO FAST FOR THE BIOLOGICAL CYCLE

SETTLE MATURE, OR THE TOTAL WATER FLOW IS NOT

ENOUGH FOR THE FOR THE POND VOLUME.

REMOVE DEBITS FROM THE POND, FOR EXAMPLE

STRINGY ALGAE, LEAVES, LONG STANDING SLUDGE

BUILD-UP FROM THE BOTTOM OF THE POND

INCREASE FILTER AND PUMP SIZE

INCREASE THE FREQUENCY OF FILTERS BACK FLUSH

AND EASY CLEANING FUNCTION TILL WATER BECOMES

CLEARER OVER TIME. SOME EXTREME SITUATIONS MAY

REQUIRE WEEKLY BACK FLUSHES

REMOVE AND CLEAN AS PER

CLEANING INSTRUCTIONS

WAIT TILL EVENING TO CHECK THE ILLUMINATION.

TURN ON POWER

REPLACE THE UV BULB.

TURN KNOB TOWARDS THE OUTLET DIRECTION

TURN ON POWER

FIND BLOCKAGE & REMOVE

SWITCH THE POSITIONS FOR HOSES, SUCH THAT THE

INLET IS CONNECTED TO THE CORRECT PORT

OPEN UP THE FILTER LID AND RE-ALIEN THE COGS SO

THAT THE TEETH MATCH UP CORRECTLY

13/5/2022 8:23 am