Diamond +7FRED1200 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penggorengan Diamond +7FRED1200. Diamond +7FRED1200 15 halaman.
Juga untuk Diamond +7FRED1200: Panduan Memulai Cepat (15 halaman), Manual (15 halaman)

Halaman Cetak

1. Fryer Use

1.2. ELECTRIC MODELS

Switching on

• Pour the oil in the tank up to the max. level indicated by the

special reference notch obtained on the rear wall of the tank.

• Turn on the main switch located ahead of the appliance.

• Turn the knob of thermostat "A" to the value corresponding

to the required cooking temperature.

• Lighting up of green indicator "B" signals that the power is

on. Lighting up of yellow indicator "C" signals that the

heating elements are on; it goes off when the set tempe-

rature is reached.

NB! When using a fryer with heating elements inside the

tank, pay particular attention when handling them, using the

special support bracket "D". For greater safety, a microswitch

cuts off the power when the heating elements "E" are raised.

Switching off

• Turn the knob of thermostat "A" anticlockwise to position

"0".

1.3. ELECTRIC MODEL

CONTROL

5 2

1 -

ON/OFF key

2 -

temperature setting key

3 -

left basket program start key

4 -

right basket program start key

5 -

temperature (work and set) display

6 -

program (left and right) time display

7 -

temperature setting (up / down)

8 -

left basket program time setting (up / down)

9 -

right basket program time setting (up / down)

10 - stored (or storable) program keys

11 - key for "melting" cycle (Off / On: the melting cycle begins at

swicht-on if the temperature recorded by the work thermostat

is below 70°C)

Switching on: press button "1".

Switching off: press button "1".

1.4. TEMPERATURE SETTING

• Display "5" shows the set temperature for cooking. To display

the actual temperature of the oil in the tank for a few seconds,

briefly press key "2".

• Press keys "7" to increase/decrease the set value. The display

has a sensitivity of ±1°C (keeping key "7" pressed, the

temperature setting changes faster). After setting, display "5"

flashes for 3 seconds, then the temperature indicated will be

stored.

• If the LED of key "2" is:

- RED: the temperature of the oil has still not reached the

set temperature.

- GREEN: the oil has reached the set temperature.

Cooking can begin.

1.5. COOKING TIME SETTING

• Display "6" shows the set cooking time.

• Press keys No.8/9 to increase/decrease the set value:

the display has a sensitivity of ±5s and allows a min. time

of 00:30s. (keeping keys "8-9" pressed, the set time changes

faster).

• After setting, display "6" flashes for a few seconds, then

the value indicated will be stored.

• Press keys "3"/"4" to start lowering the left/right lifter.

Display "6" corresponding to "6" will start the set time count-

down. On reaching the value 00:00, the cycle ends with

the lifter coming out of the oil bath and the display gives

the value initially set.

WITH ELECTRONIC