Panasonic WV-SC385 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Camcorder Panasonic WV-SC385. Panasonic WV-SC385 36 halaman. Ip video cameras
Juga untuk Panasonic WV-SC385: Spesifikasi (2 halaman), Panduan Instalasi (40 halaman), Grafik Perbandingan (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (40 halaman), Catatan Integrasi (8 halaman)

Halaman Cetak

Precautions for installation

No responsibility will be taken by our company with

respect to consequeces resulting from the use,

damage or both of the camera.

Installing place

Contact your dealer for assistance if you are unsure of an

appropriate place in your particular environment.

• Make sure that the installation area is strong enough

to hold this product, such as a concrete ceiling.

• When the installation area is not strong enough, rein-

force and strengthen it or use an optional mount

bracket

(WV-Q155S,

WV-Q156C or WV-Q105).

• When the product is installed on a wall, use an option-

al wall mount bracket (WV-Q154C).

• When using an outdoor housing to install the product,

use an optional inner cover (WV-Q157).

• The optional mount brackets for WV-NS202A

(WV-Q150C, WV-Q150S, WV-Q151C, WV-Q151S,

WV-Q152C, WV-Q153) cannot be used with this

product.

• When using an optional inner cover WV-Q157, upper

side of images will be hidden (become black) when

the tilt angle of the camera is almost level. (When

"–5°" is selected for "Tilt Angle" on the setup menu,

upper half of images will be hidden.) In this case,

images may also be washed out depending on the

photographic subject when "On" is selected for

"AGC" on the setup menu.

Refer to the Operating Instructions (PDF) for further

information about the setup menu.

Do not place this product in the following places:

• Locations where it may get wet from rain or water

splash

• Locations where a chemical agent is used such as a

swimming pool

• Locations subject to humidity, dust, steam and oil

smoke

• Locations in a specific environment where a solvent or

a flammable atmosphere exists

• Locations where a radiation, an X-ray, a strong radio

wave or a strong magnetic field is generated

• Locations where corrosive gas is produced, locations

where it may be damaged by briny air such as sea-

shores

• Locations where the temperature is not within −10 °C

to +50 °C {14 °F to 122 °F}.

• Locations subject to vibrations (This product is not

designed for on-vehicle use.)

• Locations subject to condensation as the result of

severe changes in temperature (In case of installing

the camera in such locations, the dome cover may

become foggy or condensation may be caused on

the cover.)

WV-Q155C,

WV-Q156S,

Procure fixing screws separately.

The screws that secure this product are not supplied.

Prepare them according to the material and strength of

the area where the product is to be installed.

Screw tightening

• The screws and bolts must be tightened with an

appropriate tightening torque according to the materi-

al and strength of the installation area.

• Do not use an impact driver. Use of an impact driver

may damage the screws or cause tightening exces-

sively.

• When a screw is tightened, make the screw at a right

angle to the surface. After tightening the screws or

bolts, perform visual check to ensure tightening is

enough and there is no backlash.

Be sure to remove this product if it is not in use.

Radio disturbance

When this product is used near TV/radio antenna, strong

electric field or magnetic field (near a motor, a transformer

or a power line), images may be distorted and noise

sound may be produced.

PoE (Power over Ethernet)

Use a PoE hub/device that is compliant with IEEE802.3af

standard.

Router

When connecting this product to the Internet, use a

broadband router with the port forwarding function (NAT,

IP masquerade).

Refer to the Operating Instructions (PDF) for further infor-

mation about the port forwarding function.

Time & date setting

It is necessary to set the time & date before putting this

product into operation. Refer to the Operating Instructions

(PDF) on the provided CD-ROM for descriptions of how to

perform the settings.