Panasonic WV-SW395 Panduan Instalasi - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Camcorder Panasonic WV-SW395. Panasonic WV-SW395 40 halaman. Ip video cameras
Juga untuk Panasonic WV-SW395: Spesifikasi (2 halaman), Brosur (2 halaman), Grafik Perbandingan (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (40 halaman), Catatan Integrasi (8 halaman)

Configure the network settings

Install the software

Before installing the software, refer to the readme file on the provided CD-ROM first.

Software included on the provided CD-ROM

• Panasonic IP setting software

Configure the network settings of the camera. Refer to the following for further information.

• Viewer Software "Network Camera View 4S"

It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. Install the viewer

software by double-clicking the "nwcv4Ssetup.exe" icon on the provided CD-ROM.

Configure the network settings of the camera using the Panasonic IP setting software

It is possible to perform the network settings of the camera using the IP setup software on the provided CD-ROM.

When using multiple cameras, it is necessary to configure the network settings of each camera independently.

If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on

the "Network" page of the setup menu. Refer to the Operating Instructions (PDF) for further information.

Important:

• When using Microsoft Windows Vista, the "Windows Security Alert" window may be displayed when starting the IP

setup software. In this case, disable "User Account Control" from the control panel.

• For the security enhancement, the MAC address/IP address of the camera to be configured will not be displayed when

around 20 minutes have passed after turning on the power of the camera. (When the effective period is set to "20min"

in the IP setup)

• Panasonic IP setting software is inoperable in other subnets via the same router.

• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).