Diamond Audio Technology D5 5.1 Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Mobil Diamond Audio Technology D5 5.1. Diamond Audio Technology D5 5.1 17 halaman. Professional reference series amplifier

DIMENSIONS
CONTINUOUS RMS OUTPUT POWER
Note: Full Rated Power is generated at all voltages between 11 and 14.5VDC.
60W x 5 @ 4 Ohm (min. impedance)
140 x 2 @ 2 Ohm (min. impedance)
280 x 1 @ 4 Ohm Bridged (min. impedance)
CROSSOVER SPECIFICATIONS
Quantity:
5 - Fully Independent
Type:
3 Defeatable Fixed Highpass (front, rear, and center)
1 Adjustable Lowpass (sub channels)
1 Adjustable Sub-sonic (sub channels)
Slope:
12 dB/oct.
Alignment:
Butterworth

FUSE RECOMMENDATIONS

D5 Professional Reference Series Amplifiers come with circuit board mounted
fusing. In addition to that we recommend that you install the correct size
fuse/holder combination to the main power cable within 18 inches of the
battery. This will protect your vehicle from fire damage due to a short circuit
to the chassis or vehicle body. If a single amplifier is installed, follow the fuse
recommendation below. If installing multiple amplifiers, add up the total fuse
ratings of all installed amplifiers. This should be used as your main fuse rating.
Amplifier
D5 5.1
D5 5.1
Length:
17"
Width:
12"
Height:
2 3/4"
D5 5.1
and
70W x 2 @ 4 Ohm
or
or
Maximum Fuse Rating
90
Diamond Audio Technology 2