Diamond Audio Technology D5 5.1 Manual do Proprietário - Página 4

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador para automóvel Diamond Audio Technology D5 5.1. Diamond Audio Technology D5 5.1 17 páginas. Professional reference series amplifier

Imprimir página

DIMENSIONS

CONTINUOUS RMS OUTPUT POWER

Note: Full Rated Power is generated at all voltages between 11 and 14.5VDC.

60W x 5 @ 4 Ohm (min. impedance)

140 x 2 @ 2 Ohm (min. impedance)

280 x 1 @ 4 Ohm Bridged (min. impedance)

CROSSOVER SPECIFICATIONS

Quantity:

5 - Fully Independent

Type:

3 Defeatable Fixed Highpass (front, rear, and center)

1 Adjustable Lowpass (sub channels)

1 Adjustable Sub-sonic (sub channels)

Slope:

12 dB/oct.

Alignment:

Butterworth

FUSE RECOMMENDATIONS

D5 Professional Reference Series Amplifiers come with circuit board mounted

fusing. In addition to that we recommend that you install the correct size

fuse/holder combination to the main power cable within 18 inches of the

battery. This will protect your vehicle from fire damage due to a short circuit

to the chassis or vehicle body. If a single amplifier is installed, follow the fuse

recommendation below. If installing multiple amplifiers, add up the total fuse

ratings of all installed amplifiers. This should be used as your main fuse rating.

Amplifier

D5 5.1

Length:

17"

Width:

12"

Height:

2 3/4"

D5 5.1

and

70W x 2 @ 4 Ohm

Maximum Fuse Rating

Diamond Audio Technology 2