Panasonic AW-HS50 Series Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Digital Panasonic AW-HS50 Series. Panasonic AW-HS50 Series 6 halaman. Combining pinp
Juga untuk Panasonic AW-HS50 Series: Manual (20 halaman), Brosur & Spesifikasi (4 halaman), Manual (4 halaman), Manual (2 halaman), Panduan Memulai Cepat (4 halaman)
Halaman Cetak
【Step 2】 Settings for enabling each function
★ All the description below is about the settings on AW-RP50.
Setting for Switching the Sources
① Enable the function to switch the sources.
Menu: (9) SETUP > [2] SW LINK => 2. BUSCONT => [On]
② Select the source you want to switch to.
Menu: (9) SETUP > [2] SW LINK => 3. BUS => [AUX, PVW, PinP, KEY (Key Fill)]
AW-HS50
AUX
Video Output
Setting for Focus Assist Function
① AUX source image output from AW-HS50 is switched to an image from a remote camera selected by AW-RP50.
If this setting is set to "Off", AW-HS50 AUX output image is switched to MV screen.
Menu: (9) SETUP > [2] SW LINK => 4. FASISIT => [On]
(Schematic: If the source to switch to is set to [AUX])
(Schematic: Focus Assist Function)
* Default: [Off]
(AW-RP50 Control Panel）
* Default: [Off]
* Default: [AUX]