Panasonic AW-HS50 Series Hızlı Başlangıç Kılavuzu - Sayfa 4
Dijital Kamera Panasonic AW-HS50 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Panasonic AW-HS50 Series 6 sayfaları. Combining pinp
Ayrıca Panasonic AW-HS50 Series için: Manuel (20 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Manuel (4 sayfalar), Manuel (2 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır
【Step 2】 Settings for enabling each function
★ All the description below is about the settings on AW-RP50.
Setting for Switching the Sources
① Enable the function to switch the sources.
Menu: (9) SETUP > [2] SW LINK => 2. BUSCONT => [On]
② Select the source you want to switch to.
Menu: (9) SETUP > [2] SW LINK => 3. BUS => [AUX, PVW, PinP, KEY (Key Fill)]
AW-HS50
AUX
Video Output
Setting for Focus Assist Function
① AUX source image output from AW-HS50 is switched to an image from a remote camera selected by AW-RP50.
If this setting is set to "Off", AW-HS50 AUX output image is switched to MV screen.
Menu: (9) SETUP > [2] SW LINK => 4. FASISIT => [On]
(Schematic: If the source to switch to is set to [AUX])
(Schematic: Focus Assist Function)
* Default: [Off]
(AW-RP50 Control Panel）
* Default: [Off]
* Default: [AUX]