Panasonic DMC-FT3 Panduan Petunjuk Pengoperasian Dasar - Halaman 35
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian Dasar untuk Kamera Digital Panasonic DMC-FT3. Panasonic DMC-FT3 36 halaman.
Juga untuk Panasonic DMC-FT3: Panduan Petunjuk Pengoperasian Dasar (36 halaman)
Halaman Cetak
Crash resistance
perfomance
Dustproof
performance
Battery Charger (Panasonic DE-A60A):
Information for your safety
Input:
Output:
Operating
temperature:
Battery Pack (lithium-ion) (Panasonic DMW-BCF10E):
Information for your safety
Voltage/capacity:
The test method of the camera is in compliance with
"MIL-STD 810F Method 516.5-Shock"
¢ "MIL-STD 810F Method 516.5-Shock" is the test
method standard of the U.S. Defense Department,
which specifies performing drop tests from a height
of 122 cm, at 26 orientations (8 corners, 12 ridges,
6 faces) using 5 sets of devices, and passing the 26
orientation drops within 5 devices.
(If failure occurs during the test, a new set is used to
pass the drop orientation test within a total of 5
devices)
•
Panasonic's test method is based on the above
"MIL-STD 810F Method 516.5-Shock". However, the
drop height was changed from 122 cm to 200 cm
dropping onto 3 cm thick plyboard. This drop test was
passed.
(Disregarding appearance change such as loss of paint
or distortion of the part where drop impact is applied.)
There is no guarantee of not breaking or
malfunctioning under all conditions.
Equivalent to IEC 60529 "IP6X".
110 V to 240 V
4.2 V
0.65 A
¢
0 oC
to 40 oC
¢ The battery cannot be recharged in a temperature
less than 0 oC. (The [CHARGE] indicator blinks
when the battery cannot be recharged.)
3.6 V/940 mAh
50/60 Hz, 0.2 A
¢
.
(ENG) VQT3L38
35