Panasonic DMC-FT3 기본 사용 설명서 - 페이지 35

{카테고리_이름} Panasonic DMC-FT3에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-FT3 36 페이지.
Panasonic DMC-FT3에 대해서도 마찬가지입니다: 기본 사용 설명서 (36 페이지)

Crash resistance

perfomance

Dustproof

performance

Battery Charger (Panasonic DE-A60A):

Information for your safety

Input:

Output:

Operating

temperature:

Battery Pack (lithium-ion) (Panasonic DMW-BCF10E):

Information for your safety

Voltage/capacity:

The test method of the camera is in compliance with

"MIL-STD 810F Method 516.5-Shock"

¢ "MIL-STD 810F Method 516.5-Shock" is the test

method standard of the U.S. Defense Department,

which specifies performing drop tests from a height

of 122 cm, at 26 orientations (8 corners, 12 ridges,

6 faces) using 5 sets of devices, and passing the 26

orientation drops within 5 devices.

(If failure occurs during the test, a new set is used to

pass the drop orientation test within a total of 5

devices)

•

Panasonic's test method is based on the above

"MIL-STD 810F Method 516.5-Shock". However, the

drop height was changed from 122 cm to 200 cm

dropping onto 3 cm thick plyboard. This drop test was

passed.

(Disregarding appearance change such as loss of paint

or distortion of the part where drop impact is applied.)

There is no guarantee of not breaking or

malfunctioning under all conditions.

Equivalent to IEC 60529 "IP6X".

110 V to 240 V

4.2 V

0.65 A

0 oC

to 40 oC

¢ The battery cannot be recharged in a temperature

less than 0 oC. (The [CHARGE] indicator blinks

when the battery cannot be recharged.)

3.6 V/940 mAh

50/60 Hz, 0.2 A

(ENG) VQT3L38