HP 316095-B21 - StorageWorks Edge Switch 2/24 Petunjuk Manual - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Beralih HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 halaman. Edge switch release notes
Juga untuk HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual Pembaruan (9 halaman), Manual (41 halaman), Manual (40 halaman), Catatan Rilis (32 halaman), Catatan Rilis (27 halaman), Manual (26 halaman), Catatan Rilis (27 halaman), Catatan Rilis (25 halaman), Panduan Petunjuk Instalasi (24 halaman), Catatan Rilis (23 halaman), Catatan Rilis (23 halaman), Catatan Rilis (22 halaman), Catatan Rilis (23 halaman), Catatan Rilis (19 halaman), Catatan Rilis (19 halaman), Catatan Rilis (18 halaman), Catatan Rilis (17 halaman), Petunjuk Peningkatan (16 halaman), Petunjuk Manual (16 halaman), Panduan Petunjuk Instalasi (16 halaman), Catatan Rilis (16 halaman), Catatan Rilis (17 halaman), Catatan Rilis (17 halaman), Catatan Rilis (11 halaman)

Figure 2 Maintenance Feature Installation tab

Enter the feature key in the Feature Key box, and then click Update.

A conﬁrmation page contains a warning that this action will override the current set of features on

the switch.

Click OK to activate the new feature key.

The switch performs an IPL when the key is activated and the feature key is installed.

NOTE:

When you select OK, all current features are replaced with new features.

Back up the conﬁguration data when you are ﬁnished conﬁguring the switch.

Installing a feature key using HAFM

After obtaining the feature key, install the feature using HAFM as follows:

If your ﬁrmware is 04.01.02 or later, proceed to

If your ﬁrmware is earlier than 04.01.02, Select Maintenance > Set Ofﬂine State to set the switch

ofﬂine.

The Hardware View is displayed.

Select Conﬁgure > Features.

The Conﬁgure Feature Key dialog box is displayed

Flexport upgrade instructions

step

(Figure

3).