HP 316095-B21 - StorageWorks Edge Switch 2/24 Petunjuk Manual - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Beralih HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 halaman. Edge switch release notes
Juga untuk HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual Pembaruan (9 halaman), Manual (41 halaman), Manual (40 halaman), Catatan Rilis (32 halaman), Catatan Rilis (27 halaman), Manual (26 halaman), Catatan Rilis (27 halaman), Catatan Rilis (25 halaman), Panduan Petunjuk Instalasi (24 halaman), Catatan Rilis (23 halaman), Catatan Rilis (23 halaman), Catatan Rilis (22 halaman), Catatan Rilis (23 halaman), Catatan Rilis (19 halaman), Catatan Rilis (19 halaman), Catatan Rilis (18 halaman), Catatan Rilis (17 halaman), Petunjuk Peningkatan (16 halaman), Petunjuk Manual (16 halaman), Panduan Petunjuk Instalasi (16 halaman), Catatan Rilis (16 halaman), Catatan Rilis (17 halaman), Catatan Rilis (17 halaman), Catatan Rilis (11 halaman)

The Hewlett-Packard Authorization Center will deliver the unique feature key to you by the same

method you use to send your information to the Authorization Center. For example, if you send your

information by e-mail, the Authorization Center will send the feature key to you by e-mail.

NOTE:

Feature keys are encoded to work with the serial number of the installed switch only. Record

the key in case you need to re-install the feature.

If the switch fails and must be replaced, obtain new feature keys from the HP Authorization Center

using the contact information described in

and replacement switches.

Installing a feature key

The feature key is entered using HAFM, Embedded Web Server (EWS), or the command line interface

(CLI).

NOTE:

To use CLI to conﬁgure a feature key, see the CLI reference guide.

After obtaining the feature key, install the feature using EWS as follows:

Ensure that the browser-capable PC and the Ethernet LAN segment (with the Edge Switch attached)

are connected.

At the PC, launch the browser (Netscape Navigator or Internet Explorer).

At the browser, enter the IP address of the Edge Switch as the internet Uniform Resource Locator (URL).

The Enter Network Password dialog box is displayed.

Enter the user name and password, and then click OK.

The Topology view is displayed with status information about each fabric element, including the

product to be conﬁgured.

Click Switch Details.

The Hardware view is displayed.

Select Conﬁgure > Optional Features.

The Maintenance Feature Installation page (ﬁrmware 8.x or later) is displayed

Table

2. Please have the serial numbers of the failed

Edge Switch 2/24 Flexport upgrade instructions

(Figure

2).