HP ProCurve 1600M Panduan Instalasi - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 46 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (28 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Suplemen Manual (28 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

NOTE

Step 1. Use at least a 1.3mm

Step 2. Connect the power cable from the DC source to the power connector.

For complete power redundancy, connect each power supply to a separate

power source. This protects the system from power failure if one power

source fails. Connecting both power supplies to the same power source

protects the system if one power supply fails, but not from a failure in the

power source.

terminal.

Connect the earth ground cable to the grounding lug near the power

connector on the face plate of the power supply.

Attach the cable to the grounding lug using the starwasher and nut

provided.

The installation order for the connection is:

1. Ring terminal

2. Starwasher

3. Nut

Chapter 3

Connecting the DC Power Supply

(16 AWG) earth ground cable with a crimp-on ring

Connecting the Power Supply