HP ProCurve 1600M Panduan Instalasi - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 46 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (28 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Suplemen Manual (28 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

WARNING

Connecting the DC Power Supply

Safety Grounding Procedures

Each power supply has an M5 stud, starwasher, and nut on the rear

panel for connecting to earth ground. Both power supplies should be

connected to earth ground using a minimum 1.3 mm

with a suitable Listed/Certified M5, or equivalent crimp-on ring

terminal.

This equipment must be connected to earth ground to assure

continued safe operation, to prevent damage from electrostatic

discharge, and to assure compliance with electromagnetic

compatibility requirements.

Disconnect power from the source before connecting power to

the product or before accessing the product's power terminals.

The DC source can supply high levels of current capable of

causing serious burns and arcing that can produce molten metal.

The steps required to connect the power supply are:

1. Connect the earth ground cable.

2. Connect the DC power cable.

3. Attach the cable strain relief.

4. Verify the power supply is installed correctly.

(16 AWG) cable

Chapter 3