HP ProCurve 1600M Panduan Instalasi - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 46 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (28 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Suplemen Manual (28 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

WARNING

CAUTION

Replacing the DC Power Supply

The DC power supply replacement steps are:

1. Disconnect the DC power.

2. Disconnect the earth ground.

3. Remove the installed power supply from the power supply slot.

4. Install the new power supply in the power supply slot in the back of

the Switch.

5. Reconnect the earth ground.

6. Reconnect the DC power.

7. Verify that the power supply is installed correctly.

Disconnect power from the source before connecting power to

the product or before accessing the product's power terminals.

The DC source can supply high levels of current capable of

causing serious burns and arcing that can produce molten metal.

Disconnect DC power from the power supply BEFORE installing or

removing the supply. Not disconnecting the power first can damage the

power supply or switch. Read this manual for proper handling

procedures.

To avoid power supply or switch damage, do not attempt to power-up the

power supply outside the switch chassis. The power supply requires a

load and other enabling signals to operate properly.

Chapter 4