HP ProCurve 1600M Panduan Instalasi - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 46 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (28 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Suplemen Manual (28 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

Step 1. Unplug the power cable from the power supply.

Step 2. Disconnect the ground cable from the grounding lug near the power

Step 3. Use either a flat-bladed or Torx T-10 screwdriver and loosen the four

Step 4. Pull the power supply out of the opening, lifting it up while pulling.

Figure 4-1

Removing the Power Supply

connector on the face plate of the power supply.

captive screws connecting the existing power supply.

Removing the Power Supply from the Switch Chassis

Chapter 4

Replacing the DC Power Supply

Retaining Screws