HP ProCurve J8766A Panduan Instalasi - Halaman 41

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve J8766A. HP ProCurve J8766A 48 halaman. Hp procurve switch vl modules
Juga untuk HP ProCurve J8766A: Baca Saya Terlebih Dahulu (4 halaman), Panduan Referensi Cepat (44 halaman)

Halaman Cetak

Installing the Patch Cord

As shown in the illustration below, connect the patch cord to the Gigabit-LX

mini-GBIC with the section of single-mode fiber plugged in to the Tx (transmit)

port. Then, connect the other end of the patch cord to your network cabling

patch panel, or directly to the network multimode fiber.

If you connect the patch cord directly to the network cabling, you may need

to install a female-to-female adapter to allow the cables to be connected

together.

to network

multimode

cabling

the multimode cable in the patch cord

must match the characteristics of your

network cable

Figure 14. Mode Conditioning Patch Cord

Ensure you purchase a patch cord that has LC connectors on the end that

connects to the Gigabit-LX mini-GBIC, and has multimode fibers that match

the characteristics of the multimode fiber in your network.

ProCurve Switch vl Modules

Mode Conditioning Patch Cord for Gigabit-LX

Gigabit-LX port

LC Connector

single-mode section plugs into Tx

port on Gigabit-LX mini-GBIC