HP StorageWorks 2/16 - SAN Switch Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih HP StorageWorks 2/16 - SAN Switch. HP StorageWorks 2/16 - SAN Switch 22 halaman. Fabric os commands
Juga untuk HP StorageWorks 2/16 - SAN Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Catatan Rilis Firmware (14 halaman), Catatan Rilis (32 halaman), Catatan Rilis (16 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (10 halaman), Panduan Referensi Cepat (5 halaman)

Halaman Cetak
HP StorageWorks 2/16 - SAN Switch Panduan Pengguna
Remote Switch

Configuring a Remote Switch Fabric

A Remote Switch fabric requires two StorageWorks SAN Switches (2Gb, v 3x or
v4x), or StorageWorks Core Switches with identical configurations.
Remote Switch is supported over Fibre Channel for the following gateway
devices:
Most of these gateway devices include a large number of buffers to cover data
transfer over WAN.
A separate extended fabric license is not required to operate the switch at
distances much greater than 100 kilometers. This can be achieved when the switch
operates over an FCIP WAN connection.
In addition to normal switch configuration options, you can configure the
following parameters depending on the gateway requirements:

Accessing the Switch using Telnet

Use telnet commands to set the following:
18
ATM
IP
SONET
DWDM
R_A_TOV: Resource Allocation Timeout Value
E_D_TOV: Error Detect Timeout Value
dataFieldSize: Maximum FC data field reported by the fabric
BB_Credit: Number of Buffer-to-Buffer credits for Nx_Port devices
NoClassF: Enable/Disable class F traffic
Suppress Class F Traffic: Disable class F traffic
R_A_TOV and E_D_TOV values
Data field size
HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide