HP StorageWorks 2/16 - SAN Switch Manual do utilizador - Página 18

Procurar online ou descarregar pdf Manual do utilizador para Interruptor HP StorageWorks 2/16 - SAN Switch. HP StorageWorks 2/16 - SAN Switch 22 páginas. Fabric os commands
Também para HP StorageWorks 2/16 - SAN Switch: Manual de atualização (9 páginas), Manual de instruções de instalação (20 páginas), Notas de versão do firmware (14 páginas), Nota de lançamento (32 páginas), Nota de lançamento (16 páginas), Manual de instalação (14 páginas), Nota de lançamento (10 páginas), Manual de referência rápida (5 páginas)

Remote Switch

Configuring a Remote Switch Fabric

A Remote Switch fabric requires two StorageWorks SAN Switches (2Gb, v 3x or

v4x), or StorageWorks Core Switches with identical configurations.

Remote Switch is supported over Fibre Channel for the following gateway

devices:

Most of these gateway devices include a large number of buffers to cover data

transfer over WAN.

A separate extended fabric license is not required to operate the switch at

distances much greater than 100 kilometers. This can be achieved when the switch

operates over an FCIP WAN connection.

In addition to normal switch configuration options, you can configure the

following parameters depending on the gateway requirements:

Use telnet commands to set the following:

ATM

SONET

DWDM

R_A_TOV: Resource Allocation Timeout Value

E_D_TOV: Error Detect Timeout Value

dataFieldSize: Maximum FC data field reported by the fabric

BB_Credit: Number of Buffer-to-Buffer credits for Nx_Port devices

NoClassF: Enable/Disable class F traffic

Suppress Class F Traffic: Disable class F traffic

R_A_TOV and E_D_TOV values

Data field size

HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide