Aquatek ATAIOIF Series Panduan Pengoperasian & Pemeliharaan - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Pemeliharaan untuk Sistem Penyaringan Air Aquatek ATAIOIF Series. Aquatek ATAIOIF Series 16 halaman. Chemical free iron & sulfer filter

Halaman Cetak

A Control Valve

B Mineral Tank

About Your Filter

How Does my Sulfur and Iron Filter Work?

This filter uses a special blend of calcium, magnesium oxide

and sand that is highly effective for removal of hydrogen sul-

fide and iron. The filter uses an air chamber within the tank to

capture and oxidize the elements and then filter them through

the media bed. An automatic backwashing system will clean

the media of the sulfur and iron leaving the system clean, and

the water you drink odor free.

All Aquatek Iron Filters are comprised of two primary

components: (A) Control Valve, (B) Mineral Tank.

A. Control Valve: Your control valve automatically

performs the 3 primary operations which are com-

monly referred to as cycles. These operations/cycles

are:

1. Pre-Treatment Oxidation: Air is injected into the

mineral tank which causes contaminants in the

water to precipitate and settle out. Precipitated

contaminants are much larger and clump to-

gether so they can be removed through filtration.

2. Service / Filtration: The oxidized water is now

flushed through the media bed comprised of Ze-

oLite

mechanically strains the contaminants like iron,

manganese, & hydrogen sulfide.

3. Backwash: Once the media bed has reached its

predetermined limit of filtration it cleans and re-

plenishes itself through backwashing. Backwash-

ing is a forceful flush that removes the filtered

contaminants and then flushes then down the

drain.

B. The Mineral Tank: The mineral tank contains the

filtration media and is where the the treatment of

the water takes place during the 3 stages mentioned

above.

UNITED WATER INC.

AtAIOIF-S

quAtek

erIeS

(see pg 4) and gravel underbedding which

Ser

uIde