HP StorageWorks 8B - FC Entry Switch Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 14 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Catatan Rilis (26 halaman), Manual (50 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman), Catatan Rilis (16 halaman)

Note:

inner rails. Each switch requires a different number of these screws. For example,

Figure 7

screws. Attaching both inner rails requires ten screws.

Figure 7: Assembling the inner rails

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

a. Assemble the two inner rails (one on each side) to the switch using the

appropriate number (from

screws as shown in

The rail kit provides fourteen #8-32 x 3/16-inch screws for assembling the

shows the an inner rail being attached to the SAN Switch 2/16 with five

step

5) of #8-32 x 3/16-inch Phillips pan-head

Figure

Addendum Pg