HP StorageWorks 8B - FC Entry Switch Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 30 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (26 halaman), Manual (50 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Catatan Rilis (16 halaman)

Halaman Cetak
HP StorageWorks 8B - FC Entry Switch Panduan Pengguna
3
Using ISL Trunking
ISL Trunking Telnet Commands
The following table shows the telnet commands used to manage the ISL Trunking feature.
Table 3-1
Telnet Command
portCfgTrunkport
switchCfgTrunk
trunkDebug
trunkshow
For detailed information on how to use these commands, refer to the Fabric OS Reference Guide.
3-2
ISL Trunking Telnet Commands
Description
Use this command to
configure a port to be
enabled or disabled for
ISL Trunking.
Use this command to
enable or disable
trunking on all ports of a
switch.
Use this command to
debug a trunk link
failure.
Use this command to
display ISL Trunking
membership
information.
Example
To enable port 5 for ISL Trunking,
enter:
portCfgTrunkport 5, 1
To disable port 5 for ISL Trunking,
enter:
portCfgTrunkport 5, 0
To enable ISL Trunking on all ports of
a switch, enter:
switchCfgTrunk 1
To disable ISL Trunking on all ports
of a switch, enter:
switchCfgTrunk 0
To debug ports 1 and 2, enter:
trunkDebug 1, 2
To display ISL Trunking membership
information about users, enter:
trunkshow
ISL Trunking User's Guide