HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Panduan Referensi - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Referensi untuk Beralih HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 46 halaman. 1u rackmount tape enclosure
Juga untuk HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Petunjuk Instalasi (2 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (14 halaman), Petunjuk Instalasi (2 halaman)
Halaman Cetak
Installation in racks with 10-32 threaded holes
For installation in racks with 10-32 threaded holes in the vertical mounting bars the pins supplied on
the rails must be removed. The rails will be attached with user-supplied 10-32 x.375 screws.
1.
Remove the pins and threaded plates from both ends of each outer rack rail. See
These pieces will not be used.
Figure 18
Remove the pins and mounting hardware from the rack rail
NOTE:
The ends of the rack rails are marked FRONT and REAR for proper orientation.
2.
Attach the front mounting plate of each outer rail to the rack using four 10-32 screws in the
previously marked holes in the front vertical mounting bars of the rack. See
2
Figure 19
Installing the rack rails in front of rack
24
Rack Installation
1
1
1
15114
15119
Figure
18.
Figure
19.