HP XP20000/XP24000 Panduan Konfigurasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 44 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

Halaman Cetak
HP XP20000/XP24000 Panduan Konfigurasi

Assigning the new devices to volumes

A volume can span as many as 32 devices, so you can assign more than one device to a volume.
The addition of new volumes to the NetWare server may require a memory upgrade. See the NetWare
documentation or contact Novell customer support.
NetWare 5.x
1.
On the Available Disk Options screen, click NetWare Volume options and press Enter to display
the volume options.
The existing volumes are listed by volume name, and the volume options are displayed at the
bottom of the screen.
2.
Execute the Add/View/Modify volume segments command by pressing the Ins or F3 key.
The Segment List of Volume Disk screen displays the existing devices by device number. The
Volume assignment column displays (free space) for each device that is not yet assigned to a
volume.
3.
Execute the Make a volume assignment command as follows:
1.
Move the cursor to the line containing the desired device.
2.
Move the cursor onto (free space) in the Volume assignment column.
3.
Press Enter.
4.
When the What do you want to do with this free segment? message appears,
select an option, and press Enter. If you selected Make this segment part of another
volume, select the volume to add this segment to, and then press Enter.
5.
In the Disk Segment Parameters screen, enter the new volume name (or verify the selected volume),
and enter the disk segment size. The segment size is the same as the partition size entered during
disk partitioning.
6.
Press F10 to save the new volume information and return to the Volume Disk Segment List screen.
7.
On the Volume Disk Segment List screen, press F10 to save the new volume information and
return to the volume list.
8.
Repeat
Step 1–Step 7
are finished assigning new devices to volumes, press Esc to save your volume changes.
9.
When the confirmation message appears, click Yes and then press Enter to save all changes and
return to the Installation Option screen.
NetWare 6.0
1.
Using ConsoleOne, right-click the targeted server and click Properties.
2.
Click the Media tab and select NSSPools.
3.
Click New... to open the Create a New Logical Volume screen and enter the name for the new
pool. Then click Next.
4.
On the Create Logical Volume – Storage Information screen, select the desired pool/device,
enter the desired Volume Quota, and click Next.
5.
After you have created the pool, select Activate and Mount in the On Creation box, and then
click Finish.
18
Installing and configuring Novell NetWare for the XP family of disk arrays
until you have assigned all new disk array devices to volumes. When you