HP Xw460c - ProLiant - Blade Workstation Panduan Pertanyaan yang Sering Diajukan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pertanyaan yang Sering Diajukan untuk Beralih HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 14 halaman. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Juga untuk HP Xw460c - ProLiant - Blade Workstation: Panduan Pelaksanaan (35 halaman), Panduan Pencegahan Kesalahan (12 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Panduan Instalasi (2 halaman), Poster Pengaturan (9 halaman), Panduan Instalasi (33 halaman), Panduan Manajemen (28 halaman), Manual Perangkat Keras (23 halaman), Ikhtisar (35 halaman), Panduan Pengguna (33 halaman), Panduan Pengoptimalan (13 halaman), Garansi Terbatas (10 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Petunjuk Instalasi (8 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (2 halaman)

ISS Technology Update

Volume 6, Number 9

and continue to provide backward compatibility, although it is expected that almost all future discrete I/O devices, regardless

of their bandwidth requirements, will be developed to the PCIe standard.

HP has been a leader in the development and implementation of industry-standard I/O technology and continues to be a core

member of the PCI Special Interest Group. HP is committed to delivering industry-leading products that meet customer

requirements for flexibility, performance, and investment protection.

Port monitoring in Virtual Connect for the c-Class BladeSystem

The ability to monitor Ethernet settings (port monitoring) is available in a free Virtual Connect (VC) firmware update. This feature

is available to users with server and network administrator privileges. All other users will have read-only access. To use port

monitoring, all modules within the domain must be using Virtual Connect Manager 1.20a

or higher.

There are two steps to monitoring an Ethernet port.

1. Configure Virtual Connect to mirror to the desired server NIC traffic to an "analyzer" port (available in 1.20a and higher)

2. Connect a network sniffer or analyzer to the analyzer port

Port monitoring allows an administrator to duplicate the network traffic over a set of server ports and send it to an unused uplink

port for the purpose of monitoring or debugging network traffic.

• Any unused port on a VC-Ethernet module can be specified as the port monitoring port (one per enclosure).

• Any server Network Interface card's ingress or egress (or both) traffic can be mirrored to that port.

Administrators can access port monitoring through the Virtual Connect Manager over the same Ethernet connection used to

access the HP Onboard Administrator and iLO connections (Figure 3-1).

Figure 3-1. Virtual Connect Manager screen for Ethernet settings

Version 1.20a is available for download from

http://h18023.www1.hp.com/support/files/server/us/download/28035.html?jumpid=reg_R1002_USEN.