aquatherm AT800 Panduan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pompa Panas aquatherm AT800. aquatherm AT800 16 halaman. Swimming pool & spa heat pumps
“black cabinet” with analog controls series only
Juga untuk aquatherm AT800: Panduan Operasional Pemilik (12 halaman), Panduan Instalasi (8 halaman)
Plumbing & Water Connections for Pool/Spa Combinations
For a connected pool and spa, where the spa has a spill over type waterfall into the pool. Where
one pump and one heater is used for either the pool or the spa. If the water pump exceeds 1.5
H.P. then install either of the optional bypasses as shown on page 5.
SPA
POOL
SEE CHLORINATOR LOOP & CHECK
VALVE REQUIREMENT ON PAGE 5.
Plumbing & Water Connections for Separate Pool & Spa
For a separate pool and spa not con-
nected, and does not have a spill-
over. Where the pool and the spa
have separate pump & filter systems
but using the same heater. If the water
pump exceeds 1.5 H.P. then install
either of the optional bypasses as
shown on page 5.
SEE CHLORINATOR LOOP & CHECK
VALVE REQUIREMENT ON PAGE 5.
Page 6