Diamond Products CC800M Panduan Operator - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Operator untuk Melihat Diamond Products CC800M. Diamond Products CC800M 8 halaman. Core cut masonry saw
Halaman Cetak
PERSONAL SAFETY
•
Read
and understand
•
Do
not operate
the saw under
•
Always
wear
safety-approved hearing,
•
Sturdy
boots with
non-slip
•
Under certain conditions, sparks
•
Know
how to stop saw
•
Keep
all parts
of
your
•
Wear
work
gloves to avoid
BLADE SAFETY
•
Examine
cutting
blades
undamaged.
Use
only the blades recommended for
•
This
saw
should cut only
blade
to determine which material
•
Inspect blade flanges for
clean,
undamaged
shaft.
•
Use
only blades marked with
GENERAL SAW SAFETY
•
Never leave
saw unattended
•
Keep
guards in
place
•
Use
caution and follow instructions
machine when
transporting.
•
Do
not
use
saw or blade if damaged. Do not use
•
Never operate
gas
•
Establish
a training
CUTTING/WORK AREA SAFETY
•
N ever operate the saw in any application or job where you are not trained or supervised.
•
N ever operate gas engine in enclosed areas without proper ventilation.
•
Keep bystanders and or animals out of the work area.
•
Before refueling saws with gas engines, shut off engine and allow it to cool. Do not smoke while handling fuel.
Make sure that the gas cap on the saw and fuel can are tight before starting the saw.
•
Do not operate the saw in areas of combustible material or fumes. Sparks may occur from the blade that could
cause a fire or explosion.
•
Know the material and work area you are sawing. Hazardous conditions such as live electrical, water or gas lines
can be concealed in the material.
Failure
to
comply with preceding warnings could result in
2
SAFETY WARNINGS
instructions
before operating
the
influence
of
drugs
eye,
head and
soles aid in providing proper footing.
may
fly,
so
never
quickly
in case of emergency.
body away from the blade
contact
with
concrete
before each
use.
Blade
should
material
that is
specified on each cutting
the blade
is designed
damage,
excessive wear
a
maximum operating
when
running.
and in good condition when
when
transporting,
engine in
enclosed
areas
without proper ventilation.
program
for
all operators of this machine and blade.
!
WARNING: !
The
engine
product
contains
the
State
birth
defects or
saw.
or
alcohol.
respiratory
protection.
Use
of
steel-toed safety
wear
clothes of
flammable
material.
at all
times.
slurry,
which can
cause serious
have no cracks,
nicks
or
your
model.
b
lades.
Read
the
to
cut.
and
cleanliness before
mounting blade.
speed
greater
than the
blade
saw
is
in
operation.
lifting,
and
setting
up
a blade
that has been
dropped.
serious
exhaust from this
chemicals known to
of California
to
cause
cancer,
other reproductive
harm.
boots
is
recommended.
skin
irritation.
flaws.
Center
hole
should be
instructions
which are on
each
Blade
should fit
snugly
shaft
speed.
saw.
Always
tie down the
bodily injury!
on